Newamstar‘s carbonated soft drink filling machine (csd filling machine) could be separated to 3 modules. The height of the bottle-out conveyor is adjustable. Bottles are conveyed to rinser, filler and capper through starwheel and conveyed out finally through bottle-out conveyor. Equip alarm device for bottle block, bottle absence, cap absence and overload. The machine meets the national food hygienic standard, with high automation and easy to operate.
| Quick Details | |||
| Type: | Carbonated Soft Drink Filling Machine | Applicable Industries: | Food & Beverage Factory |
| Showroom Location: | Global | Condition: | New |
| Application: | Carbonated Beverages | Filling Range: | 150ml、250ml、350ml、450ml、550ml、750ml、1.5L、2L、2.5L |
| Packaging Material: | Wood | Automatic Grade: | Fully Automatic |
| Driven Type: | Electric | Voltage: | As Your Require |
| Place Of Origin: | China | Brand Name: | Newamstar |
| Production Capacity: | 12,000BPH–81,000BPH | Key Selling Points: | High-accuracy、High-speed |
| Filling Modes: | Mechanical valve filling or electronic valve filling | Filling Material: | Cola, soft drinks, gas soda, etc. |
| Suitable Container: | PET bottles of various shapes and capacities | ||
Blowing System:
Before delivery, preforms are lifted and sorted by a dumper, a preform elevator and a preform sorter. Preforms are transported by a star wheel to the preform deduster to clean the preforms from dust. Then, preforms are connected to the heating head and heated at their bodies and bottoms excepting mouths to be cooled down. After that, preforms are transported to opening and rotating molds. Preforms are stretched and huffed by the air cylinder. Low-pressure is needed for the first blow and high-pressure for the second blow. The molds would be opened automatically after exhaust and then bottles would be transported out of the machine.
Rinsing System
1. The equipment applies unique overturning bottle clamp, which is hygienic and durable. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp.
2. The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
3. All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
Filling System
1. Clip the bottle neck with steel starwheel. There is no need to adjust the equipment height when changing the bottle shape whose diameters have no much change.
2. Rotating disks all make from stainless steel ANSI304. Large planar toothed bearings can ensure the stable operation of machine.
3. High-precision electronic liquid level filling valve makes fast and slow fillings possible.
4. Automatic washing cup can circularly and thoroughly clean the filling valve through CIP cleaning program.
5. Integrate filling valve with bottle lifting mechanism. The simplified structure makes cleaning easier and could improve the stability of the machine. Bottleneck is clipped by clippers.
Capping System
1. Adopt magnetic constant torque capping head, which is stable. And the capping defective rate is smaller than 0.2%.
2. There is a line of optoelectronic switches in the cap falling guide rail. If there is no cap in the rail, the machine would automatically stop, sparing the situation of no cap.
3. Bottle-in detection switch is equipped in the capper. The cap locking cylinder connected to cap falling guide rail and cap moving disk continuously control the discharge of caps, so as to ensure no cap-in when there is no bottle, reducing the abrasion of caps.
| Item | Remark | Capacity | |
| Water Treatment System | 5 – 100T/H | ||
| Beverage Pre-treatment System | 5 – 60T/H | ||
| Filling production line | Aseptic Filling Combiblock Line | PET Bottle | 12,000 – 43,200BPH |
| Blowing Filling Capping Combiblock | PET Bottle | 12,000 – 81,000BPH | |
| Rotary Blow Molding Machine | PET Bottle | 12,000 – 81,000BPH | |
| Hot Filling Combiblock Line | PET Bottle | 12,000 – 43,200BPH | |
| Ultra-clean Filling Combiblock Line(Middle Temperature) | PET Bottle | 12,000 – 43,200BPH | |
| Ultra-clean Filling (ESL) Combiblock Line | PET Bottle | 12,000 – 43,200BPH | |
| Bottled Water Filling Combiblock Line | PET Bottle | 12,000 – 81,000BPH | |
| 3L-10L Big Bottle Water Filling Combiblock Line | PET Bottle | 16,000 – 81,000BPH | |
| 5L Big Bottle Water Blowing Filling Capping Combiblock Line | PET Bottle | 2,000 – 12,000BPH | |
| CSD Filling Combiblock Line | PET Bottle | 12,000 – 60,000BPH | |
| CSD Filling Combiblock Line | Glass Bottle | 12,000 – 43,200BPH | |
| CSD Filling Combiblock Line | Can | 9,000 – 30,000BPH | |
| Condiment Filling Combiblock Line (Soy sauce, Vinegar) | PET Bottle | 5,000 – 36,000BPH | |
| Condiment Filling Combiblock Line (Soy sauce, Vinegar) | Glass Bottle | 5,000 – 36,000BPH | |
| 3L-5L Big Bottle Edible Oil Filling Combiblock Line | PET Bottle | 1,000 – 6,000BPH | |
| Liquid Household & Personal Care Products Filling Combiblock Line | PET Bottle | 5,000 – 36,000BPH | |
| Beer Filling Combiblock Line | PET Bottle | 12,000 – 48,000 BPH | |
| Barreled Water Filling Combiblock Line | 3/5 Gallon | 600 – 3,000BPH | |
| Downstream Packaging (PE Film Shrink Wrapper, Packer, Palletizer, etc.) System | 5,000 – 81,000BPH | ||
| Shuttle-type automatic warehouse system | |||
| Stacking-type automatic warehouse system | |||
| Management system of intelligent factory | |||
About Newamstar:
Newamstar‘s expertise in liquid packaging ensures the perfect combination of process design and product-line engineering. With the established process design system of various liquid packaging fields such as beverages, dairy products, liquors, condiments, and daily chemical products, we can provide customized turnkey solution for your project considering different packaging forms and specific factory layouts.
E-mail: e@newamstar.com
WhatsApp: +86 185 2130 0509
Reviews
There are no reviews yet.